November 10, 2000 TECHNICAL NOTE 11: HEADSPACE BACKGROUND: Few topics inspire as much interest and confusion as headspace. It is one of the few technical small arms terms recognized, if not understood, by even beginning shooters. It is seldom firmly understood by even experienced shooters. FACTS: 1. In a narrow sense, headspace is the size of the cartridge chamber designed to accept a particular cartridge. Headspace is defined as minimum and maximum dimensions from the locked breech to either a contact surface or designated datum in the rifle chamber, or to the rear of the barrel. The points of measurements chosen depend on the type of cartridge case used (rimmed, rimless, semi-rimmed, or belted). 2. In a broader sense, headspace is a far more complex relationship between the cartridge, chamber, and firearm mechanism. The starting point for headspace is the cartridge case. The complex functions of the cartridge case include holding the cartridge components together, aligning the bullet in the bore, expanding to seal high pressure gasses, contracting in time for easy extraction, and removing heat from the chamber. Proper space for the cartridge allows it to function well. Improper space can cause dangerous pressure conditions at worst, or interfere with the function of the action. 3. Headspace ranges are established by industry advisory bodies, government bodies, or by individual manufacturers. In the U.S. the primary advisory body is the Small Arms and Ammunition Manufacturers Institute (SAMMI). Issues of producibility, safety, and mechanism reliability with a particular cartridge must be considered. Firearm manufacturers must produce firearms with chamber headspace that is producible, yet assures safe and reliable operation with all ammunition made to standard. This becomes an extremely difficult challenge when making self-loading firearms. EXAMPLE: A .308 Winchester rifle with a SAAMI chamber, and ammunition made to SAAMI standard cartridge dimensions and tolerances reveals acceptable headspace ranges of:
In this example, the SAAMI maximum headspace/minimum cartridge allowance produces so much clearance, .013 inch, that it will reduce case life. This much headspace would probably be found only on a used rifle. The SAAMI minimum headspace/maximum case condition produces .004 inch of interference that could make semi-automatic operation unreliable. The challenge for a manufacturer is to find a headspace range large enough to allow reliable operation and small enough to assure accuracy by aligning the cartridge in the chamber uniformly. Dimensions for new firearms should be equal to or larger than the SAAMI minimum to assure safety, but smaller than the SAAMI maximum to allow safe operation even after long years of use and wear. 4. Different headspace dimensions are defined by different manufacturers and organizations. An excellent example is the 7.62mm/.308 cartridge:
Note that the government ranges are for new guns; the SAAMI ranges allow for wear. After Considerable experimenting, ArmaLite has adopted the following headspace dimensions for factory acceptance:
The government-accepted headspace range of the M1 Garand is .004", the M60 machine-gun, .003", the M14, .003", and the M14 National Match, .002." ArmaLite's headspace dimension for the AR-10(T) is deliberately set slightly larger than that of the M-14NM rifle due to differences in the locking action of the bolt lugs. 5. Gage manufacturers ordinarily produce headspace gages to the SAAMI specification defining "go" (minimum) as 1.630", "no go" (normal maximum) as 1.636", and "field reject" (the largest safe maximum) as 1.640". It is important to note that technical issues define the headspace acceptable for each design, and that SAAMI'S standards are only a starting point. Customers often use SAAMI-based commercial gages to measure a firearm like an M-14 or an AR-10 and then declare its headspace wrong. That's incorrect because SAAMI's .308 minimum is not proper for the M-14 or for AR-10s. In summary, firearms frequently require custom headspace gages suited to their specific design. MISCONCEPTIONS: MAW Copyright © 1998 ArmaLite, Inc. |
ArmaLite, Incorporated | ® | P.O. Box 299 Geneseo, IL. 61254 |
|
r15 bushmaster rock river arms olympic arms assult rifle ar armalite guns rifles .223 .308 fal m1a